Sign In | Join Free | My enlightcorp.com
China Luy Machinery Equipment CO., LTD logo
Luy Machinery Equipment CO., LTD
Customized Autoclave Carbon Steel or Stainless Steel
Verified Supplier

7 Years

Home > Wood Treatment Plant >

High Configuration Wood Treatment Plant , Wood Pressure Treatment Equipment Customized

Luy Machinery Equipment CO., LTD
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

High Configuration Wood Treatment Plant , Wood Pressure Treatment Equipment Customized

Place of Origin : China

MOQ : 1 set

Price : Negotiable

Payment Terms : T/T, L/C, D/A, D/P, Western Union, MoneyGram

Supply Ability : 5000 set per year

Delivery Time : Shipped in 35 days after received payment

Packaging Details : Nude packing, can be shipped by containers or bulk cargo

Material : Q345R carbon steel

Pressure : 1.0-1.4Mpa

Length : from 1m to 60m (Can be customized)

Installation : overseas service provided

Origin : China

Material thickness : 12mm 14mm(can be customized)

Brand Name : LUY

Contact Now

High Configuration Wood Treatment Plant , Wood Pressure Treatment Equipment Customized

Ⅰ Product description

Wood treatment plant is that preventing wood material from Worms, bacteria and other organisms destroy. Such as termite.It is one of wood technology .Adopt differnt chemical preservative to make wood protector,prolong wood using life time and reduce wood consumption.It widely use in protection treatment of pole material ,lumber material ,plate material .

Wood treatment plant mainly used for deep processing of wood, vacuum pressure treatment method, so that the wood to achieve anti-corrosion, pest control, and other purposes. This device can be applied to various water-soluble chemicals such as CCA, ACQ, boric acid, Tanalith E and etc.

Ⅱ Main Model

Type Total Capacity(m3) Effective capacity(m3)
DN 1200*6000mm 6.7 4.5
DN 1200*8000mm 9.0 6.0
DN 1500*4000mm 7.0 4.71
DN 1500*6000mm 10.5 7.0
DN 1500*8000mm 14 9.4
DN 1800*4000mm 10.1 6.78
DN 1800*6000mm 15.2 10.17
DN 1800*8000mm 20.3 13.5
DN 2000*6000mm 18.8 12.5
DN 2000*8000mm 25 16.7
DN 2000*10000mm 31.4 20
DN 2000*18000mm 56 37

Note: The diameter and length can be customized according to users' needs. If the above model is not suitable, please tell us the diameter and length you need. We can customize it for you.

Ⅲ Technical parameters

No. Name Unit Technical data
1 Design pressure MPa 1.58Mpa
2 Working pressure MPA 1.0-1.4Mpa
3 Vacuum degree(relative) MPa -0.098MPa
4 Power source 380v 3 phase 50hz
5 Material Q345R
6 Open door ways Manual open door ways
7 Seam method Silica gel seam
8 Safety ways Double safety device for door and three safety device for cylinder
9 Alarm ways Automatic light alarm ,over pressure and finish work

Ⅳ Technology Process

Initial vacuum: we need to keep the tank vacuum before filling of the wood preservative. And it will make the wood preservative into wood cells better. The vacuum degree is -79.8~90kpa and the vacuum time is according to different product(normally 15-60 minutes). when the cylinder in vacuum state, a part of air in the wood was taken out, the resistance will reduce when the wood preservative pushed into wood, so the wood preservative will be easy to get into wood cell.

Filling of preservative into tank: Add the wood preservative by manual valve when the equipment in vacuum state, to make sure the air which in the same condition was stopped in the wood cells. (the degree of vacuum is up to the size of valve)

Boost pressure stage: Begin to boost pressure lowly to 1.0-1.4MPa when the preservative is full of wood tank ,then keep the pressure value until the regulation preservative into the wood.

Pressure relief and discharge preservative: Discharge the pressure after the regulation preservative is absorbed. There will be a little recoil phenomenon(5-15%) during the process.

Final vacuum: Pumping air from the tank to keep the tank vacuum after the preservative discharged from the tank. The purpose is to extract excess wood preservative to reduce the phenomenon of oil dripping.

Recover atmosphere, then open the door and take out of timbers.

Ⅴ Our advantages

1. Double safety protection device :we design double safety device ,manual safety ,and automatic safety interlock ,Only there is pressure inside the tank ,the worker cann’t open the door .

2. Automatic set time function and light alarm ,save worker’s time ,you can set any time in the control box ,once it finish ,it will stop work and alarm

3. Quickly discharge chemical :10 minutes to discharge chemical ,improve treated time

4. Perfect tightness :we use air filled style to seam the door and the system match automatic inlet and outlet air pneumatic valve, it can balance tank pressure well .

5. High efficiency ,save energy ,once the equipment finish vacuum and pressure stage ,the pump will stop ,but whole tank still keep vacuum state

6. Advanced open door method ,only one young girl can open the door easierly

High Configuration Wood Treatment Plant , Wood Pressure Treatment Equipment Customized


Product Tags:

timber treatment plant

      

wood impregnation plant

      
Quality High Configuration Wood Treatment Plant , Wood Pressure Treatment Equipment Customized for sale

High Configuration Wood Treatment Plant , Wood Pressure Treatment Equipment Customized Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Luy Machinery Equipment CO., LTD
*Subject:
*Message:
Characters Remaining: (0/3000)